Please select a product from the drop down menu above.
Fiddy Plus – JTAG, SPI, and UART Debug Tool
We designed this because we got tired of getting clone chips and unnecessarily large breakout boards that were difficult to connect. This does exactly what it is supposed to with a Genuine FTDI FT2232H high-speed IC. All of the I/O is clearly labelled for SPI, JTAG, and UART use. An EEPROM is on-board that can be used for setting the FT2232H into more unusual modes.
TrueRNG v3 – hardware random number generator
The TrueRNG v3 is an optimized and improved version of our TrueRNG v2. It provides a steady stream of random numbers through a USB CDC serial port. The random data can then be used to fill the entropy pool in an operating system, or used directly in a custom application. The TrueRNG v3 is ideal for Security related applications (SSH, SSL, GPG), Gaming (dice,cards), Statistical Sampling and simulations.
TrueRNGpro – hardware random number generator
The TrueRNGpro provides a steady stream of random numbers through a USB CDC serial port. At >3.2 Mbits/s TrueRNGpro is 9x faster. TrueRNGpro comes with a variety of modes making it more versatile and allowing for independent verification of the raw data stream. TrueRNGpro has real time monitoring of each noise generator with LEDs to provide visual confirmation that everything is working as it should as expected. It features dual independently shielded noise generators that are double shielded inside of an aluminum enclosure.
Dual Noise Generator Experimenters Kit
This board produces two channels of about 1.5 Peak-to-peak of white noise. The dominant noise source is Avalanche noise with minor contributions from Shot and Thermal noise. Connect a 17-30VDC power supply to the power input and the board will produce two channels of white noise on the 3.5mm stereo jack and headers. The outputs on the headers have 2.5V DC offset for sampling with an Arduino or other embedded system. The output on the 3.5mm stereo jack is at 0V DC offset for use with PC audio cards and other devices.
The MIDI Breakout board is an easy way to connect a hardware MIDI device to an Arduino or microcontroller / embedded computer. Kit comes with choice of male or female header, or solder wires directly. There are mounting holes for a more permanent installation. 4 wires to hook up, power, ground, rx (MIDI in), and tx (MIDI out).
SWD Adapter for ST-Link v2 Clone
Facilitates solid connection between ST-Link clone and 0.050″ (1.27mm) connector. Selectable 3.3v and 5V power to target board. Correct pinout for many STM32 and other ARM board. Comes with right angle header, 1×3 header, jumper, and 2×5 0.050″ (1.27mm). Since there are two common pinouts for the ST-LINK V2 clones, this kit comes with two boards — one for each
AtariPunkr is a stepped tone generator also known as an Atari Punk Console which provides hours of noisy fun for everyone! This kit makes a great gift for young electronic enthusiast learning to solder. It comes with an Mylar Speaker and also has a 1/8″ (3.5mm) Stereo output jack for pairing with an Audio Amplifier such as the CleanAmp.
TrueRNG v2 – hardware random number generator (discontinued)
The TrueRNG v2 provides a steady stream of random numbers through a USB CDC serial port. The random data can then be used to fill the entropy pool in an operating system, or used directly in a custom application. The TrueRNG v2 is ideal for Security related applications (SSH, SSL, GPG), Gaming (dice,cards), Statistical Sampling and simulations.
WIOT allows you to develop and create using the Arduino IDE you are already comfortable using. Make sure you check out the github source code repository for example sketches where we show you how to have WIOT serve up a simple webpage and toggle an led from your browser.
Pico Load Kit (under redevolopment)
Pico Load is a convenient easy to solder constant current load also known as a DC Electronic Load. It is typically used for testing batteries and power supplies. The digital readout makes setup simple. Simply connect the power supply you wish to test to the banana jack terminals and turn the potentiometer until the display reads the desired current draw.
Hybrid Vacuum Tube Audio Amplifier (discontinued)
This is a hybrid amplifier with a class A tube input stage, and solid state class AB push-pull output stage producing approximately 8 watts of RMS power (13 watt peak). A vacuum tube input stage gives your music a nice warm sound while the solid state output stage provides low-distortion power giving you the best of both retro and modern worlds
Small, low-cost USB PIC16F1455 Breakout board with an open breadboarding area. This board is capable of Full-Speed USB communications using a minimal design. Assembly is very straight-forward and DIY friendly as the design uses all through-hole components (even the mini-USB connector).
CleanAMP is a 100W (music power) Class-AB low noise audio amplifier kit perfect for converting your favorite set of speakers into a Hi-Fi Stereo sound system. The kit is comprised entirely of through-hole components and is capable of providing 2 channels of crystal clear audio at 35Watts RMS per channel
MIDI Breakout Board (old version)
The MIDI Breakout board is an easy way to connect a hardware MIDI device to an Arduino or microcontroller / embedded computer.