Profile
Coverstitch Troubleshooting Steps - Solving Common Coverstitch Problems
You may have the best coverstitch machine for the money, but issues like skipped stitches may show up from time to time. Irregular tensions and seam issues may also crop up when using your coverstitch machine; hence you must learn to perform basic troubleshooting techniques and find the right solution for each unique problem. Sometimes, using the wrong needle can be difficult to detect because you might think you are using the right one. When you search for the top coverstitch machines on the market, make sure you also search for the right needle ranges for different fabrics.Troubleshooting, Solution, and Tricks for Bulky SeamsBulky seams can create a lot of irregularities and other problems on your fabric. Most of the skipped stitches in coverstitch machines happen when you stitch over bulky seams. To troubleshoot this problem, try to clip the side of the bulky seams at the fold of the hem and then lay the clipped seam in the opposite direction to resolve the issue. Sometimes you may have to hammer the seam flat, and you may need a rubber hammer for this purpose because even good quality coverstitch machines for home use do not come with a hammering accessory.You can use a clearance plate, also known as the Hump Jumper, a tool that you can use in raising the presser foot when you sew over bulky seams. You will notice that your seam has become regular, and there should be no skipped stitches when you use this troubleshooting trick.You may also want to experiment with different speeds when sewing over a hump. Some experts advise that you should go faster with stitching over bulky seams. This trick may be best suitable if you use the best coverstitch machine with a more flexible speed range.Troubleshooting Setting Related Issues on Your CoverstitchSometimes issues like tunneling or formation of ridges between stitches lead to uneven looper stitches. In this case, you need to check the settings on the machine. You can troubleshoot and remedy this issue by slightly adjusting the tension, stitch length, or differential feed settings. A cheap coverstitch sewing machine may not have all the settings you need, but most medium to premium-end coverstitch machines should have all necessary settings.For instance, you may want to adjust the tension on one of the needles if the stitches remain uneven. You may also want to begin the troubleshooting by loosening the looper tension significantly to reduce the tunneling effect.To avoid many other coverstitch issues, you need to use the proper stitching techniques. Make sure that the needle hits the fabric on the first stitch when you start sewing. You may want to sew the first few stitches and sew with confidence and a decent speed to achieve a better result. Experts even suggested that you should begin and end your stitching with a fabric strap. The importance of choosing the best coverstitch machine to buy cannot be over-emphasized; hence you must be guided by product reviews and comparisons on this website.Forum Role: Member
Topics Started: 0
Replies Created: 0